4.8.2 Health & Safety Settings

You are able to create multiple different types of H&S assessment for your company e.g. H&S Risk Assessment, Asbestos Survey, Legionella Risk Assessment, Electrical Installation Condition Report. For each type of assessment you will need to specify the default re-inspection frequency and whether or not a re-inspection is mandatory. Note: In most instances a re-inspection will be mandatory.

Access from the Workbench using the Agent Preferences 'cog' located in the top right of the screen. Then click on the Health & Safety tab. 

The assessments you create on this screen are the ones that appear in the Block Area. It allows you to Reorder as well to keep it organised on this screen. Once the assessments are created, you can track them using the H&S Dashboard which is found in the Workbench under Reporting -> H&S Summary. 

The settings for the H&S Dashboard can be altered via the Agent Preferences tab and then Health & Safety. 

Here you can set the number of days that the system will use to give the different warning indicators in the H&S Summary screen ( 4.8.4 Workbench - H&S Summary). 

• Related Articles

• 3.5.3 Health & Safety

  Accessed via Workbench -> Settings This tab allows you to create the health & safety assessments.  NOTE: There is a Reorder button as well but this is purely for this tab and not the block area.  You can [Add] a new assessment and this will then ...

• 4.8.1 Health & Safety Overview

  Blocks Online provides the facility to allow the tracking and monitoring of health and safety assessments. There are three components to Health and Safety. Health & Safety Settings You are able to create multiple different types of H&S assessment for ...

• 4.8.3 Block Area - Health & Safety

  In the Block Area, H&S Requirements are added for each area of a block that requires a H&S assessment. Multiple assessment reports can be added to each H&S Requirement. If a H&S assessment is undertaken each year then each report would be stored ...

• 3.5.2 Agent Preferences

  Accessed via Workbench -> Settings This tab consists of several tabs: Distribution Finance Health & Safety Standing Order Distribution This section allows you to enter in the default printing preferences for demands and credit control. Here you can ...

• 5.2.1 Property Portal Setting - Workbench

  Agent Preferences setting Before you start to give unit holders access to the Property Portal, you want to change the settings and make sure that everything is set accordingly beforehand. This can be done via the cog icon on the top right hand side ...